Wichita Falls Masonry Contractors: Chimney, Fireplace & Brick Repair, Tuckpointing & Flagstone Patios
#1 Masonry & Stonework Contractor in Wichita Falls, CA
At Wichita Falls Masonry, we specialize in chimney repair, tuckpointing, fireplace repair, brick repointing, brick sealing, efflorescence removal, brick repair, brick steps, retaining wall installation, and brick wall construction for homes and properties throughout the city. We've spent over 17 years repairing brick and stone across Wichita County, matching mortar to ASTM C270 specifications so new joints perform and look like the originals.
Every project starts with an on-site evaluation and a written, itemized estimate before any brick or mortar work begins. For projects that require it, we pull permits through the City of Wichita Falls Building Inspections Division and carry general liability and workers' compensation coverage. Wichita Falls sees roughly 60 nights of freezing temperatures a year on top of the region's expansive clay soil, and that combination is what breaks down mortar joints and shifts retaining walls. Getting the repair right the first time keeps small cracks from turning into structural repairs.
Get a FREE Quote
Why We're The Best Masonry Contractors in Wichita Falls, TX
Residential Masonry Services in Wichita Falls, TX
We work on homes throughout Wichita Falls, addressing everything from chimney cracks caused by North Texas freeze-thaw cycles to new patio installations. Below, we outline the specific residential services we provide and what each project typically involves.
Chimney Repair & Repointing
Wichita Falls chimneys take a beating from seasonal temperature swings, showing up as cracked crowns, spalling brick, and deteriorated mortar joints, so our repair work starts with an inspection to determine if damage is cosmetic or structural. We repair or rebuild the chimney crown, replace damaged flashing, and repoint crumbling mortar joints using mortar mixes matched to your existing brick for consistent strength and appearance — addressing the water intrusion that, left unchecked, can cause interior damage and reduced structural integrity over time.
Tuckpointing
Tuckpointing removes old, deteriorated mortar and replaces it with fresh mortar to restore structural stability and visual consistency, and we recommend it when joints show cracking, crumbling, or gaps deep enough to expose brick edges — common in older Wichita Falls homes where mortar has aged past its lifespan. Our process grinds old mortar to a consistent depth, cleans out debris and dust, and packs new mortar in thin, even layers matched in color to the surrounding brick, keeping moisture from penetrating the wall assembly and preventing larger repairs later.
Fireplace Repair
Our fireplace repair services cover both interior and exterior issues, including damaged fireboxes, cracked hearths, deteriorated mortar joints inside the firebox, and firebrick that cracks or shifts from years of heat exposure — a safety concern, not just a cosmetic one. We replace damaged firebrick, repair high-heat-rated mortar joints, inspect damper and flue connection points for wear, and address exterior masonry components like the surround or hearth extension, all to safety-focused building standards for wood-burning fireplace assemblies.
Brick Repair
Brick damage in Wichita Falls homes often stems from settling foundations, moisture intrusion, or age-related wear on mortar and brick face. We remove and replace cracked brick from foundation movement, replace spalled brick while addressing the moisture source, repoint and reset loose brick from deteriorated mortar, and clean efflorescence from salt deposits while correcting drainage. Replacement brick is matched as closely as possible to the original in color and texture, so repairs blend into the wall rather than standing out.
Retaining Wall Installation
Retaining walls manage soil erosion and grade changes on sloped or uneven residential lots, a common need in parts of Wichita Falls with rolling terrain. Our installation process includes proper base preparation, drainage planning, and reinforcement suited to the wall's height and soil load, building with brick, block, or stone depending on homeowner preference and site conditions. Drainage is one of the most overlooked factors in retaining wall failure, so we install gravel backfill and drainage pipe behind the wall to reduce hydrostatic pressure and significantly extend its service life.
Brick Wall Construction
We construct freestanding brick walls for privacy, property boundaries, and decorative garden enclosures. Each wall starts with a footing sized for its height and local soil conditions, laid in consistent courses with control joints to accommodate natural expansion and contraction. Homeowners choose from a range of brick colors, bond patterns, and cap styles, which we walk through during planning so the finished wall matches the style of the home and surrounding landscape.
Flagstone Patio Installation
Flagstone patios offer a natural, irregular stone surface suited to outdoor living spaces, walkways, and pool surrounds. We install using either a mortared method for a more stable, permanent surface, or a dry-set method for better drainage and easier future adjustments, depending on intended use and load requirements. Installation includes excavating and grading the base, compacting a gravel or sand layer, laying flagstone with attention to fit and spacing, and filling joints with sand, gravel, or mortar. We select stone with consistent thickness to minimize tripping hazards across the finished surface.
Stone Veneer Installation
Stone veneer gives homes and outdoor structures the appearance of solid stone at a lighter weight and lower cost than full stone construction. We install both natural thin stone veneer and manufactured stone veneer, applying a scratch coat, attaching metal lath where required, and setting each stone piece with mortar for a secure bond. This works well for exterior accent walls, fireplace surrounds, and entryway columns, with close attention to joint consistency and stone placement for a natural, cohesive look rather than a patterned, repetitive one.
Brick Steps
Brick steps face constant foot traffic and weather exposure, making them prone to cracking, uneven settling, and mortar joint failure over time. We rebuild or repair steps shifted by soil movement common in North Texas clay soil, resetting bricks, repairing or replacing eroded sub-base, and repointing joints to restore a stable walking surface. Safety is our priority since uneven steps present a fall hazard, so where a full rebuild is more practical than a patch repair, we explain the reasoning and outline the process before starting.
Commercial Masonry Services in Wichita Falls, TX
We work with property managers, builders, and business owners near Sheppard AFB, MSU, and throughout the Wichita Falls commercial corridor. Our commercial work covers structural repairs, exterior updates, and site improvements that support the durability and function of your property.
Masonry Restoration
We assess brick, block, and stone structures for cracking, spalling, and mortar deterioration before recommending repairs, matching existing materials to preserve the building's original look. Restoration work includes repointing deteriorated mortar joints, replacing damaged or spalled brick and block, repairing structural cracks in load-bearing walls, and treating moisture damage and efflorescence. We prioritize repairs that address the root cause of deterioration rather than surface symptoms, reducing long-term maintenance costs for commercial property owners.
Facade Restoration
Building exteriors face constant exposure to weather, temperature shifts, and general wear. We restore facades by repairing or replacing damaged brick, stone, and stucco while maintaining the structure's architectural character, cleaning discolored surfaces, sealing against water intrusion, and reinforcing unstable sections. We also address code compliance issues affecting occupancy permits or insurance requirements, and for older commercial buildings in Wichita Falls, we pay close attention to matching historical brick colors and mortar profiles to keep the appearance consistent while improving structural condition.
Commercial Retaining Walls
We build retaining walls for parking lots, loading areas, and sloped commercial sites needing soil stabilization, accounting for drainage, load requirements, and the specific soil conditions found across Wichita Falls properties. We work with concrete block for high-load commercial applications, natural stone for visible or decorative wall sections, and poured concrete for large-scale grading projects. Each wall is designed to handle expected load and water pressure, with drainage planning as a core part of our process since it directly affects the wall's long-term stability.
Specialty Masonry Services in Wichita Falls, TX
Local brick and stone surfaces face specific challenges from North Texas weather, including hard freezes, high summer heat, and mineral-rich water. We address these issues with targeted repair and maintenance work that keeps masonry structurally sound and visually consistent.
Brick Sealing
We apply sealant to brick surfaces to reduce water absorption and limit freeze-thaw damage common in Wichita Falls winters, since unsealed brick can absorb moisture that expands when temperatures drop and causes cracking or surface flaking. We use breathable, vapor-permeable sealants that block liquid water while letting trapped moisture escape, since non-breathable sealants can trap moisture inside the brick and cause worse damage than no sealant at all. We typically recommend resealing every 5 to 10 years depending on sealant type and sun exposure, cleaning the surface and repairing existing cracks or mortar gaps before application.
Efflorescence Removal
Efflorescence appears as white, chalky deposits that form when water moves through masonry and deposits mineral salts on the surface as it evaporates. We remove it using specialized cleaning solutions and stiff-bristle brushing, avoiding harsh acids that can etch or discolor brick, and typically combine removal with an inspection of the water source since recurring efflorescence often signals a drainage or moisture problem. Common causes include poor grading around foundations, damaged gutters or downspouts, missing or failed brick sealant, and groundwater intrusion through basement walls, so addressing the root cause prevents deposits from returning after cleaning.
Lintel Replacement
Lintels are the horizontal supports above windows and doors that bear the weight of the brick above the opening, and steel lintels are prone to rust, which expands as it corrodes and pushes against surrounding brick, causing cracks or bowing. We inspect for rust stains, cracked mortar joints above openings, or visible sagging brick as signs replacement is needed, since a failing lintel left unaddressed can cause structural instability above the opening. Our replacement process involves temporarily supporting the brick, removing the damaged lintel, installing a new galvanized or stainless steel lintel, and rebuilding the brickwork with matching mortar joints, prioritizing proper flashing to reduce future moisture exposure and rust risk.
Masonry Cleaning
We clean brick, stone, and stucco to remove dirt, algae, mold, and staining accumulated over years of exposure, using soft-wash techniques for older or softer brick and pressure washing for denser stone and concrete. We test cleaning solutions on a small, inconspicuous area first, since some older, more porous mortar mixes can be damaged by aggressive chemical cleaners. Regular cleaning every few years helps prevent organic growth and extends the life of the masonry finish, and we also clean surfaces before sealing or repointing since debris and buildup can interfere with proper adhesion.
Brick Spalling Repair
Spalling occurs when the face of a brick flakes, cracks, or pops off, usually from trapped moisture expanding during freezing temperatures, seen most often on improperly sealed brick or older brick weakened by decades of weather exposure. Repair involves removing the damaged brick and replacing it with a matching unit rather than patching the surface, since patched repairs tend to fail again under the same conditions, and we source replacement brick that closely matches the color, texture, and size of the original. We also assess the surrounding area for related moisture issues, since spalling in one section often indicates a broader water intrusion problem nearby.
Matching Mortar Color
Repointing or patch repairs can look mismatched if new mortar doesn't blend with the surrounding material, so we start by analyzing the original mortar's sand color, aggregate size, and binder ratio to formulate a close match. Mortar color depends heavily on the sand used, since it typically makes up most of the mix by volume, so we keep sample batches on hand from regional suppliers and test mixes against the existing wall before starting full repointing. Weather and age can also lighten or darken existing mortar over time, which we account for when blending new material to protect visual consistency and avoid a patchwork appearance after repairs are complete.
Masonry Materials We Use
Every project we take on starts with selecting the right material for the job. Local climate, structural demands, and the look our clients want all factor into whether we recommend stone, brick, or pavers.
Limestone
We work with limestone often because it holds up well in North Texas weather and offers a clean, classic appearance, and as a sedimentary stone it cuts and shapes easily for custom designs. We use it for exterior veneers, retaining walls, and accent features, with a natural color range from cream to tan that pairs well with most Wichita Falls brick tones. Limestone requires periodic sealing to prevent staining, and we advise clients on maintenance schedules based on exposure and use.
Flagstone
Flagstone is our go-to for patios, walkways, and stepping stone paths, chosen for its flat, naturally split surface that suits outdoor walking areas. Each piece varies in shape and color, ranging from buff and tan to gray and rust depending on quarry source, so we lay it out carefully for a balanced, cohesive look. We set it mortared or dry-laid depending on drainage needs and budget, often recommending dry-laid for patios prone to pooling since it lets water filter through joints.
Concrete Pavers
Concrete pavers give us a consistent, budget-friendly option for driveways, walkways, and patios, chosen when clients want uniformity in shape and color plus straightforward repairs down the road. Advantages include interlocking designs that resist shifting, a wide range of colors and finishes, easier individual replacement if a paver cracks or stains, and lower material cost than natural stone. We install them over a compacted base and bedding sand layer for load distribution and long-term stability, reducing cracking and settling.
Brick Pavers
Brick pavers bring a traditional, warm look to outdoor spaces, and we use kiln-fired clay for its durability and color retention since it won't fade like some concrete products. We commonly install them for walkways, patios, and driveway borders, their smaller size compared to concrete allowing detailed patterns like herringbone and basketweave. They cost more upfront than concrete, but many clients prefer the classic appearance and how it complements older or historic-style homes.
Face Brick
Face brick is the visible, exterior layer of a building's brick veneer, selected for finish quality, dimensional consistency, and color since it forms the primary aesthetic of a home or commercial structure. We source it in textures from smooth to heavily textured and colors spanning red, brown, tan, and gray, meeting stricter appearance and weather-resistance standards than common brick used for structural or hidden work. We install it as a veneer over a structural backing, anchored and tied according to current building codes.
Fieldstone
Fieldstone consists of naturally occurring stones gathered from fields, riverbeds, or quarries, used when clients want a rustic, irregular look, with no two projects alike since each stone keeps its natural shape and texture. We use it for accent walls, chimneys, and fire pits, in colors like gray, brown, and rust often mixed within the same wall for variation. Because pieces aren't uniform, we spend more time fitting and stacking each one to ensure structural stability and a balanced appearance.
Planning and Timeline
Every masonry project starts with a site visit and ends with a final walkthrough, but the steps in between depend on scope, weather, and material availability. We outline what to expect at each stage so there are no surprises along the way.
Site Assessment and Design Consultation
We begin with an on-site evaluation of your property, checking soil conditions, drainage patterns, and existing structures that may affect the build.
For Wichita Falls properties, this often means accounting for clay-heavy soil and foundation movement common in North Texas.
During the consultation, we discuss:
- Brick, stone, or block options based on your budget and style preferences
- Structural requirements for load-bearing walls, chimneys, or retaining walls
- Local code compliance for setbacks and height restrictions
- Estimated material costs and lead times
We provide a written estimate after this visit, along with a projected start date based on our current schedule.
Weather, Curing Time, and Seasonal Scheduling
Masonry work is sensitive to temperature and moisture, so we schedule projects around Wichita Falls' seasonal patterns.
Mortar needs consistent conditions to cure properly. We avoid pouring or laying masonry when temperatures drop below 40°F or during heavy rain, since both compromise bond strength.
Summer months (June–August) bring high heat, which requires us to adjust mortar mix ratios and work earlier in the day.
Winter jobs (December–February) may require temporary heating or protective coverings to maintain curing temperatures.
Spring and fall typically offer the most stable conditions for uninterrupted work. We build weather delays into our timeline estimates from the start, so clients know what to expect if conditions shift mid-project.
Masonry Project Timeline: From Estimate to Completion
Most residential masonry projects move through four phases:
- Estimate and contract (1–2 weeks) — site visit, proposal, and material selection
- Permitting (1–3 weeks) — required for structural work like retaining walls or additions
- Construction (1–6 weeks) — timeline depends on project size and weather
- Final inspection and cleanup (1–3 days) — includes site cleanup and a walkthrough with the client
A standard brick veneer or small patio project typically takes two to three weeks from start to finish. Larger jobs, like full chimney rebuilds or retaining walls, can take four to six weeks depending on curing schedules and material delivery.
What Does Our Expert Masonry Process Involve?
Wichita Falls Masonry Process
Step 1: Consultation & Site Visit
We assess your property, discuss goals, and outline options.
Step 2: Material Selection
We help you choose brick, stone, or concrete suited to your budget and climate needs.
Wichita Falls weather brings its own demands. Hot summers and occasional freezes put stress on mortar and materials over time. We account for these conditions when selecting materials and finishing techniques. This helps reduce cracking, shifting, and moisture damage down the line.
Step 3: Site Preparation
We clear the work area and prepare the foundation or surface for construction.
Step 4: Construction
Our team lays brick, stone, or block with attention to alignment, mortar joints, and structural stability.
Step 5: Final Inspection
We review completed work to confirm it meets our quality standards and your expectations.
Every project gets the same level of attention, regardless of size. A patio repair receives the same care as a commercial retaining wall.
We keep communication clear throughout the job. You'll know what stage we're at and what comes next.
Our goal is straightforward: durable masonry work that holds up under North Texas conditions. We rely on proven techniques and quality materials to get there.
How Much Does Masonry Cost in Wichita Falls, TX?
Masonry costs in Wichita Falls, TX depend on the type of project, material selection, and the condition of the existing structure. Below, we break down what drives pricing, what to expect for common services, and how to protect your budget from unexpected expenses.
Cost Factors: Materials, Labor, and Project Scope
Material choice affects price significantly. Brick, natural stone, and stucco each carry different costs per square foot, with natural stone typically running the highest due to sourcing and installation time.
Labor costs depend on project complexity. A straightforward patio installation requires less time than a custom stone fireplace or a structural retaining wall.
Project scope also matters. We factor in:
- Site accessibility — tight spaces or difficult terrain increase labor time
- Demolition needs — removing old masonry adds cost before new work begins
- Design complexity — curved walls or intricate patterns take longer than straight lines
- Local permit requirements — some structural work in Wichita Falls requires permits, which adds administrative time
We assess each of these factors during our initial site visit to give you an accurate picture of total cost.
Getting Accurate Quotes and Avoiding Hidden Fees
We provide free, itemized quotes before any work begins. A detailed quote should list material costs, labor charges, and any anticipated additional expenses separately.
To avoid surprises, ask your contractor these questions:
- Does the quote include cleanup and debris removal?
- Are permit fees included or billed separately?
- What happens if hidden structural damage is found mid-project?
- Is the quoted price fixed, or does it allow for adjustments?
We answer these questions upfront and outline them in writing. A quote with vague language or missing line items is a red flag worth addressing before signing any contract.
How Repairs vs. Full Replacement Affect Price
Repairs generally cost less than full replacement, but not always by a wide margin. Minor crack repairs or mortar repointing might run a few hundred dollars, while extensive repairs on a compromised structure can approach replacement costs.
We evaluate the extent of damage before recommending a path forward. If more than 25-30% of a structure shows deterioration, full replacement often provides better long-term value than incremental repairs.
Replacement costs more upfront but reduces the likelihood of repeat repair expenses within the next few years. We walk clients through both options with cost comparisons specific to their property's condition.
Things to Consider When Choosing a Masonry Contractor
Not every mason offers the same level of quality, and the difference often shows up years later in cracked mortar or shifting stone. Before hiring anyone in Wichita Falls, we recommend evaluating a few key factors.
Licensing, Insurance & Local Experience
We believe licensing and insurance are non-negotiable. A contractor without proper coverage puts homeowners at financial risk if an accident or property damage occurs on the job site.
Local experience matters just as much. Wichita Falls sits on clay-heavy soil that expands and contracts with moisture changes, which puts extra stress on foundations, brick veneer, and retaining walls.
A contractor familiar with our region understands how to account for this movement. We also factor in exposure to Sheppard AFB and MSU-area construction standards, since commercial and military-adjacent projects often carry stricter compliance requirements.
Before signing any contract, ask for proof of insurance and a rundown of past local projects.
Specialization in Your Type of Project
Masonry covers a wide range of work, and not every contractor handles each type equally well. We look at specialization as a way to match the right skill set to the right job.
Common categories include:
- Structural masonry – foundations, load-bearing walls, chimneys
- Decorative masonry – stone veneer, brick facades, stucco finishes
- Repair and restoration – tuckpointing, crack repair, historic brick matching
- Outdoor masonry – patios, retaining walls, fire pits
A contractor who mainly builds patios may not have the same expertise in structural chimney repair. We recommend asking directly about experience with your specific project type before moving forward.
Written Estimates & Material Transparency
A written estimate protects both the homeowner and the contractor. We always provide a detailed breakdown that separates labor costs, material costs, and any anticipated site-prep work.
Material transparency is equally important. Brick, stone, and stucco vary widely in price and durability, and a written estimate should specify exact materials, not vague categories like "standard brick."
Homeowners should ask these three questions before accepting any quote:
- Does the price include cleanup and disposal?
- Are material costs locked in, or subject to change?
- What is the estimated project timeline?
Clear documentation prevents disputes later and gives homeowners a factual basis for comparing multiple contractors.
Warranty and Workmanship Guarantees
Warranties tell us how confident a contractor is in their own work. We stand behind our projects with a workmanship guarantee that covers defects in installation, separate from manufacturer warranties on materials like brick or stone.
Homeowners should ask what the warranty period covers and whether it includes labor, materials, or both. Some contractors only guarantee workmanship for one year, while others extend coverage longer for structural masonry.
It's also worth confirming how warranty claims are handled — whether repairs are scheduled promptly and at no added cost. A contractor unwilling to put a guarantee in writing is a signal worth taking seriously.
Masonry Frequently Asked Questions
What masonry services do you offer in Wichita Falls, TX?
We handle brick, stone, and stucco installation for new construction and remodels. Our team also builds retaining walls, chimneys, patios, and outdoor fireplaces.
For commercial clients, we complete masonry work on buildings near Sheppard AFB and MSU, as well as other projects throughout the city.
Do you provide free estimates for masonry projects?
Yes, we provide free estimates for every project we quote. We visit the site, assess the scope of work, and give you a written estimate with no obligation.
This applies to both residential and commercial jobs, regardless of size.
Can you repair cracked or damaged brick and stonework?
We repair cracked mortar joints, spalling brick, shifted stone, and other common damage. Our crew matches existing materials as closely as possible so repairs blend with the rest of the structure.
We also inspect for underlying issues, such as moisture problems or foundation movement, that may have caused the damage.
How long does a typical masonry project take to complete?
Project timelines depend on scope. A small repair job might take a day or two, while a full brick or stone installation on a home can take one to three weeks.
Larger commercial projects take longer based on square footage and design complexity. We provide a timeline estimate before work begins so you know what to expect.
Are you licensed and insured for residential and commercial masonry work?
We carry the licensing and insurance required to perform masonry work in Wichita Falls and the surrounding area. This covers both residential builds and commercial contracts.
Our insurance protects your property and our crew throughout the project.
What types of brick, stone, and concrete block can you install?
We work with clay brick, natural stone, manufactured stone veneer, and standard or decorative concrete block. Material choice depends on your project's structural needs, budget, and design preferences.
We can walk you through the options available for your specific application, whether it's a home exterior, retaining wall, or commercial facade.
How much does brick or mortar repair usually cost?
Repointing (also called tuckpointing), which replaces the mortar between bricks without touching the bricks themselves, runs about $5 to $25 per square foot. Most homeowners spend somewhere between $500 and $2,500 total for a typical repair job, according to Angi and HomeAdvisor pricing data. Larger or more complex jobs, like chimneys with hard to reach spots or repairs that require replacing damaged bricks, land toward the higher end. Get a written estimate that spells out whether it covers mortar only or brick replacement too, since that's usually where the price jumps.
Is it worth hiring a mason instead of repointing brick myself?
Repointing looks simple online, but the prep work is what trips people up. Joints need to be ground or chiseled out to a consistent depth, and the wrong mortar mix can trap moisture or crack loose again within a year or two. Old homes built before the early 1900s often used lime-based mortar rather than modern cement mortar, and using the wrong type can actually damage the surrounding brick over time. For a couple of loose joints, a patient homeowner can usually manage it, but for anything covering a large wall, working at height, or an older home, hiring a mason is the safer bet.
What's that white powdery residue showing up on my brick, and does it mean something's wrong?
That's called efflorescence, water-soluble salts that were dissolved inside the brick or mortar and left behind on the surface once the moisture evaporated. It's mostly a cosmetic issue, not usually a sign of structural damage, and it can often be scrubbed off with water once the wall is dry. That said, if it keeps coming back heavily in the same spot, it usually means water is getting into the wall somewhere, like a gap in flashing or grading that slopes toward the house, and that source is worth tracking down.
Does adding stone veneer to a home's exterior actually pay off at resale?
It's one of the few exterior upgrades that consistently ranks near the top of Remodeling magazine's annual Cost vs. Value report, which tracks how much of a project's cost homeowners typically recoup at resale. Manufactured stone veneer has landed among the top two or three projects out of more than twenty categories tracked nearly every year the report has run, usually trailing only garage door replacement. It tends to work best as an accent, like a band along the lower third of the front facade, rather than covering an entire house.
Serving Wichita Falls and the Surrounding Region
Wichita Falls Masonry proudly serves homes and businesses in Wichita Falls and the surrounding towns of North Texas.
- Sheppard AFB, TX
- Burkburnett, TX
- Iowa Park, TX
- Holliday, TX
- Kamay, TX
- Petrolia, TX
- Byers, TX
- Electra, TX
- Archer City, TX
- Scotland, TX
- Windthorst, TX
- Henrietta, TX
- Bellevue, TX
- Bluegrove, TX
- Newcastle, TX
- Megargel, TX
- South Bend, TX
- Olney, TX
No matter where your job is, you get the same skilled crew, the same equipment, and the same safety standards every time. Not sure if we serve your town? Give us a call. We are happy to check.